The Future of Measuring is Here

1. Tap the crown icon on your phone’s home screen.
2. If you’re already logged in, hit Continue. Otherwise, enter your credentials when prompted.

1. In the top-right corner of the dashboard, tap New Project.
2. Give your project a name (e.g. “Smith Residence” or “123 Main St.”). You can fill in contact or address details now or later.
3. Tap Next to proceed.

1. The camera view will switch to landscape mode with a rectangular guide.
2. Step back until the entire pool fits inside the frame.
3. Tap the white camera button to take your pool photo.

1. Tap Measure the Pool at the bottom of the screen.
2. The on-screen prompt will change to “Scan the perimeter.”
3. Rotate your phone to landscape and slowly walk the entire pool perimeter twice, keeping the water’s edge in view the whole time.
   • This trains the app to recognize the boundary between deck and water.
4. When you’ve completed two full laps, tap Scan Complete.

1. Tap Start Capturing Points.
2. Line the reticle over where the pool wall begins (at the deck’s edge) and tap Place Point.
3. Move to the next spot and start placing point around the pool perimeter as you normally would with MeasurePro or traditional measuring methods.
4. Continue around the pool in the same direction until you reach your first point.
5. Rotate your phone to preview the completed outline, then tap Save.
6. If it looks good, tap Save and Continue.

1. You’ll now enter Feature Mode to mark existing anchors.
2. Tap OK, then tap Show Features.
3. When prompted for object type, select Anchor and tap Save.
4. Walk around the pool to tag every anchor, just like you did points on the wall.
5. Once you return to the starting anchor, tap Complete in the upper right corner.
6. Review your anchor map, then slide the Finish bar to complete the scan.

1. Tap OK to exit back to the project list.
2. Your new measurement appears at the bottom—tap it anytime to reopen, edit, or export your project.

You’re all set – MeasureGo will now store your project until your ready to upload to Latham’s exclusive Builder Management Portal.

Once your project is uploaded, you can download a drawing and create a quote virtually instantaneously.